Air & Cosmos - International logo

Advertising Advertising
NASA highlights “green aviation” projects
Lockheed Martin's hybrid wing body concept. © Lockheed Martin

NASA highlights “green aviation” projects

Aurora Flight Sciences’ D8 “Double Bubble” concept. © Aurora Flight Sciences

NASA has taken advantage of the recent ICAO agreement on carbon emissions from aviation to highlight ongoing work on future “green aircraft”. The agency says it is working on new technology intended to dramatically reduce fuel use, emissions and noise – with the goal of cutting emissions from the nation’s commercial aircraft fleet by more than 50%, while also reducing perceived noise levels near airports to one-half the level of the quietest aircraft flying today.

NASA recently awarded six-month contracts to four companies, who will each define the technical approach, schedule, and cost for one or more large-scale, subsonic X-plane concepts. These concepts are in support of NASA’s ultra-efficient subsonic transport research goals.

The companies are Aurora Flight Sciences, Dzyne Technologies, Lockheed Martin and Boeing. Each company is to detail their specific X-plane system requirements for a piloted experimental aircraft capable of sustained, two to three hours of powered high subsonic flight, as well as conducting at least two research flight sorties per week over the course of a year-long programme.

The requested information is to be built around a plan that would see the selected experimental aircraft eventually flying no later than 2021. The projects are part of New Aviation Horizons, a 10-year accelerated research plan developed and announced by NASA earlier this year.

The five X-plane concepts envisioned for possible further development and the contractor responsible for providing NASA with the required information include:

  • Aurora Flight Services for the D8 “Double Bubble,” a twin-aisle, largely composite airliner in which the fuselage is shaped to provide lift – enabling smaller wings – and the jet engines are mounted atop the rear tail area, which takes advantage of the air flow over the aircraft to both improve engine efficiency and reduce noise in the cabin and on the ground below.
  • Dzyne Technologies for a smaller regional jet-sized aircraft that features a blended wing body (BWB) design in which the lines of a traditional tube and wing airliner are shaped to become one continuous line in which the seam between the wing and fuselage is nearly indistinguishable. As an aerodynamic shape, this configuration increases lift and reduces drag.
  • Lockheed Martin for its Hybrid Wing Body, which includes features of the BWB on the forward part of the fuselage but has a more conventional looking T-shaped tail, with its jet engines mounted on the side of the hull but above the blended wing. Increased lift, reduced drag and quieter operations are all potential benefits.
  • Boeing for both its BWB concept – versions of which the company has flight tested with its subscale X-48 programme in partnership with NASA – and a Truss-Braced Wing concept, which features a very long, aerodynamically efficient wing that is held up on each side by a set of trusses connecting the fuselage to the wing. Otherwise the aircraft appears more conventional than the other X-plane concepts under consideration.

Preliminary design work already has begun on a half-scale X-plane called the Quiet Supersonic Technology, or QueSST, a piloted supersonic aircraft that generates a soft thump, rather than the disruptive boom currently associated with supersonic flight.

Work also is underway on the X-57 Maxwell, a general aviation-sized electric research airplane. Maxwell will fly for the first time in early 2018 and demonstrate battery-powered, distributed electric propulsion. Transport-sized electric aircraft could reduce energy use by more than 60% and harmful emissions by more than 90%.

NASA’s other green aviation initiatives include reducing airline emissions and flight delays. Working in partnership with airlines and air traffic controllers at Charlotte Douglas International Airport in North Carolina, NASA is beginning the first-of-a-kind demonstration of new technologies that coordinate operational schedules for aircraft arrivals, departures, and taxiing.

By continuing your visit to this site, you agree to our use of cookies to deliver content and services tailored to your interests.